UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1281
                        
                            Issued:1961-09-14
                    
                            Revised:2011-09-01
                    
                            Style
                            1281
                        
                            Single-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor26 AWG - 16 AWG, solid or stranded.
		
			InsulationExtruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			ShieldA conductive thermoplastic material 7 mils minimum thickness, in conjuction with a 20 AWG or 22 AWG, stranded or solid, tinned or bare copper bonding conductor. The shield may also be a wrap of aluminum faced polyester tape with a parallel uninsulated drain wire.
		
			JacketExtruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1281	Issued:1961-09-14
			Revised:2011-09-01


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	26 AWG - 16 AWG, solid or stranded.

Insulation	Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Shield	A conductive thermoplastic material 7 mils minimum thickness, in conjuction with a 20 AWG or 22 AWG, stranded or solid, tinned or bare copper bonding conductor. The shield may also be a wrap of aluminum faced polyester tape with a parallel uninsulated drain wire.

Jacket	Extruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring in electronic equipment.