UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1282
                        
                            Issued:1961-10-19
                    
                            Revised:2011-08-16
                    
                            Style
                            1282
                        
                            Single conductor with extruded insulation using non integral jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor26 AWG - 16 AWG solid or stranded.
		
			InsulationExtruded PE, 25 mils min average, 22 mils minimum at any point.
		
			ShieldNo. 36-30 AWG, tinned or untinned copper strands applied as a wrap or braid, or a wrap of aluminium faced polyester tape with a parallel, uninsulated drain wire.
		
			JacketExtruded PVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring Only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1282	Issued:1961-10-19
			Revised:2011-08-16


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	26 AWG - 16 AWG solid or stranded.

Insulation	Extruded PE, 25 mils min average, 22 mils minimum at any point.

Shield	No. 36-30 AWG, tinned or untinned copper strands applied as a wrap or braid, or a wrap of aluminium faced polyester tape with a parallel, uninsulated drain wire.

Jacket	Extruded PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring Only.