UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1285
                        
                            Issued:1961-12-19
                    
                            Revised:2011-08-11
                    
                            Style
                            1285
                        
                            Single Conductor with Extruded Insulation
                    
			Rating105 deg C, 125 Vac, Horizontal flame.
		
			ConductorCopper, nickel-alloy or stainless steel conductor, 35-31 AWG, wound 10 turns per inch min, 70 turns per inch max on a core of Polyester, Acrylic, Fiberglass or Rayon. Core may be coated with Silicone Rubber.
		
			InsulationPVC, 20 mils min average, 18 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn electrically heated pads, and where the acceptability of the combination has been determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1285	Issued:1961-12-19
			Revised:2011-08-11


Rating	105 deg C, 125 Vac, Horizontal flame.

Conductor	Copper, nickel-alloy or stainless steel conductor, 35-31 AWG, wound 10 turns per inch min, 70 turns per inch max on a core of Polyester, Acrylic, Fiberglass or Rayon. Core may be coated with Silicone Rubber.

Insulation	PVC, 20 mils min average, 18 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In electrically heated pads, and where the acceptability of the combination has been determined by Underwriters Laboratories Inc.