UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1290
                        
                            Issued:1962-03-12
                    
                            Revised:2011-09-09
                    
                            Style
                            1290
                        
                            Single conductor with extruded inslation
                    
			Rating105 deg C, 125 Vac, Horizontal flame.
		
			ConductorA.Phosphor bronze conductor, No. 37 AWG, wound a minimum of 20 turns per inch on a core of fiberglass. Diameter over conductor and core approximately 26 mils. B. Phosphor bronze conductor No. 38 AWG, wound a minimum of 20 turns per inch on a yarn core.
		
			InsulationPVC, 20 mils min average, 18 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn electrically heated pads, and where the acceptability of the combination has been determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1290	Issued:1962-03-12
			Revised:2011-09-09


Rating	105 deg C, 125 Vac, Horizontal flame.

Conductor	A.Phosphor bronze conductor, No. 37 AWG, wound a minimum of 20 turns per inch on a core of fiberglass. Diameter over conductor and core approximately 26 mils. B. Phosphor bronze conductor No. 38 AWG, wound a minimum of 20 turns per inch on a yarn core.

Insulation	PVC, 20 mils min average, 18 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In electrically heated pads, and where the acceptability of the combination has been determined by Underwriters Laboratories Inc.