UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1299
                        
                            Issued:1962-05-18
                    
                            Revised:2012-04-02
                    
                            Style
                            1299
                        
                            Single-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor26 AWG - 20 AWG solid or stranded round, bare, tinned or silver-coated, having a minimum 40 per cent conductivity.
		
			InsulationExtruded FRPE, 15 mils minimum average thickness, 14 mils minimum thickness at any point
		
			AssemblyOver the conductor shall be applied a spiral wrap of flame-retardant polyethylene thread nominal 25 mils in diameter, approximately 3/8 in. between turns. This assembly shall be enclosed with a flame-retardant polyethylene tube having a nominal 15 mil wall thickness
		
			CoveringAn extruded nylon covering, 3 mils nominal thickness, 2 mils minimum at any point thickness to be applied over the tube
		
			ShieldA shield over the nylon covering of the tube shall consist of a bare or tinned copper braid or a wrap of aluminum faced mylar tape with a parallel uninsulated drain wire.
		
			BraidOptional.
		
			JacketExtruded PVC, 20 mils minimum average thickness, 16 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1299	Issued:1962-05-18
			Revised:2012-04-02


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	26 AWG - 20 AWG solid or stranded round, bare, tinned or silver-coated, having a minimum 40 per cent conductivity.

Insulation	Extruded FRPE, 15 mils minimum average thickness, 14 mils minimum thickness at any point

Assembly	Over the conductor shall be applied a spiral wrap of flame-retardant polyethylene thread nominal 25 mils in diameter, approximately 3/8 in. between turns. This assembly shall be enclosed with a flame-retardant polyethylene tube having a nominal 15 mil wall thickness

Covering	An extruded nylon covering, 3 mils nominal thickness, 2 mils minimum at any point thickness to be applied over the tube

Shield	A shield over the nylon covering of the tube shall consist of a bare or tinned copper braid or a wrap of aluminum faced mylar tape with a parallel uninsulated drain wire.

Braid	Optional.

Jacket	Extruded PVC, 20 mils minimum average thickness, 16 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring