UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1313
                        
                            Issued:1962-10-08
                    
                            Revised:2011-08-03
                    
                            Style
                            1313
                        
                            Single Conductor with Extruded Insulation
                    
			Rating90 deg C, 250 Vac, Horizontal Flame, Wet 60 deg C.
		
			Conductor42 AWG - 20 AWG, Resistance Wire. Minimum 0.0025 in diameter resistance wire wound for a minimum 20 turns per inch on a Polyester or Fiberglass Yarn Core.
		
			InsulationExtruded PVC, 30 mils minimum average, 27 mils minimum at any point.
		
			CoveringExtruded Nylon, 3 mils minimum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. The conductor or alloy designation shall be included. Ohms per foot rating, optional.
		
			UseResistance Wire for Heating Cable Units.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1313	Issued:1962-10-08
			Revised:2011-08-03


Rating	90 deg C, 250 Vac, Horizontal Flame, Wet 60 deg C.

Conductor	42 AWG - 20 AWG, Resistance Wire. Minimum 0.0025 in diameter resistance wire wound for a minimum 20 turns per inch on a Polyester or Fiberglass Yarn Core.

Insulation	Extruded PVC, 30 mils minimum average, 27 mils minimum at any point.

Covering	Extruded Nylon, 3 mils minimum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General. The conductor or alloy designation shall be included. Ohms per foot rating, optional.

Use	Resistance Wire for Heating Cable Units.