UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1333
                        
                            Issued:1963-02-04
                    
                            Revised:2011-09-01
                    
                            Style
                            1333
                        
                            Single conductor with extruded insulation
                    
			Rating150 deg C, 300 Vac, Horizontal flame. Optional - 80 deg C Oil, Gasoline Resistant.
		
			Conductor30-10 AWG, solid or stranded, or Litz cable magnet wire, as describled below. Litz cable conductor consisists of single strand magnet wire, R/C (OBMV2) magnet wire rated a minimum of 150 deg C. Each single magnet wire strand is a conductor. AWG size to be determined by the DC Resistance Test per 1581.
		
			InsulationExtruded FEP, 13 mils minimum average thickness, 12 mils minimum thickness at any point.
		
			CoveringOptional - Extruded FEP, 10 mils minimum thickness at any point, or glass braid, 7 mils minimum thickness any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire".
		
			UseInternal wiring of Appliances. In addition, the tag may also indicate 600 Volts Peak for electronic use only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1333	Issued:1963-02-04
			Revised:2011-09-01


Rating	150 deg C, 300 Vac, Horizontal flame. Optional - 80 deg C Oil, Gasoline Resistant.

Conductor	30-10 AWG, solid or stranded, or Litz cable magnet wire, as describled below. Litz cable conductor consisists of single strand magnet wire, R/C (OBMV2) magnet wire rated a minimum of 150 deg C. Each single magnet wire strand is a conductor. AWG size to be determined by the DC Resistance Test per 1581.

Insulation	Extruded FEP, 13 mils minimum average thickness, 12 mils minimum thickness at any point.

Covering	Optional - Extruded FEP, 10 mils minimum thickness at any point, or glass braid, 7 mils minimum thickness any point.

Standard	Appliance Wiring Material UL 758.

Marking	General. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire".

Use	Internal wiring of Appliances. In addition, the tag may also indicate 600 Volts Peak for electronic use only.