UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1358
                        
                            Issued:1964-06-29
                    
                            Revised:2011-10-18
                    
                            Style
                            1358
                        
                            Single Conductor with Extruded Insulation and Covering.
                    
			Rating90 deg C, 600 Vac, Cable flame, 75 deg C Wet.
		
			ConductorResistance wire wound on a fiberglass, polyester or other suitable core materials.
		
			InsulationExtruded PVC, 45 mils minimum average thickness, 40 mils minimum thickness at any point.
		
			CoveringExtruded PP, 10 mils minimum average thickness, 8 mils minimum thickness at any point.  Or extruded Nylon, 5 mils minimum average thickness, 4 mils minimum thickness at any point.
		
			BraidOpen weave of bare copper applied overall.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. (optional marking) - The conductior alloy designation shall be included in ohms per foot rating.
		
			Use"Thermoplastic Insulated Resistance wire for Heating Cable Units; moisture resistant 75 deg C." The conductior alloy designation shall be included in ohms per foot rating (optional marking).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1358	Issued:1964-06-29
			Revised:2011-10-18


Rating	90 deg C, 600 Vac, Cable flame, 75 deg C Wet.

Conductor	Resistance wire wound on a fiberglass, polyester or other suitable core materials.

Insulation	Extruded PVC, 45 mils minimum average thickness, 40 mils minimum thickness at any point.

Covering	Extruded PP, 10 mils minimum average thickness, 8 mils minimum thickness at any point. Or extruded Nylon, 5 mils minimum average thickness, 4 mils minimum thickness at any point.

Braid	Open weave of bare copper applied overall.

Standard	Appliance Wiring Material UL 758.

Marking	General. (optional marking) - The conductior alloy designation shall be included in ohms per foot rating.

Use	"Thermoplastic Insulated Resistance wire for Heating Cable Units; moisture resistant 75 deg C." The conductior alloy designation shall be included in ohms per foot rating (optional marking).