UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1375
                        
                            Issued:1965-01-18
                    
                            Revised:2012-04-25
                    
                            Style
                            1375
                        
                            Single-conductor cable using non-integral covering.
                    
			Rating60, 80 deg C, 30 Vac, Horizontal flame.
		
			Conductor36 AWG minimum, solid or stranded.
		
			InsulationExtruded PE, extruded foamed PE, extruded XLPE, extruded foamed XLPE, extruded FRPE, extruded foamed FRPE, extruded XLFRPE, extruded foamed XLFRPE, extruded FEP, extruded foamed FEP, extruded XLFEP, extruded foamed XLFEP, extruded PFA, extruded foamed PFA, extruded XLPFA, extruded foamed XLPFA, extruded PTFE, extruded foamed PTFE, extruded XLPTFE, extruded foamed XLPTFE, extruded PP, extruded foamed PP, extruded XLPP or extruded foamed XLPP, wall thickness may range from minimum 0.007 to 0.150 inches maximum.
		
			ShieldOptional.
		
			Inner CoveringOptional. Extruded PVC, extruded PE, extruded FRPE, extruded PFA, extruded FEP, extruded PTFE, extruded Nylon (polyamide), extruded ETFE, extruded polyester or extruded TPU, approx 0.002 inches thick, or non-extruded lacquered braid, or spiral wrap of minimum 0.0006 inches thick non-extruded PETP tape applied with approx 50 percent overlap.
		
			ShieldOptional.
		
			Outer CoveringOptional. Extruded PVC, extruded PE, extruded FRPE, extruded FEP, extruded PFA, extruded PTFE, extruded Nylon (polyamide), extruded ETFE, extruded polyester or extruded TPU, approx 0.002 inches thick, or spiral wrap of minimum 0.0006 inches thick non-extruded PETP tape applied with approx 50 percent overlap, or non-extruded lacquered braid.
		
			ShieldOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in appliances, electronic equipment and electronic business machines.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1375	Issued:1965-01-18
			Revised:2012-04-25


Rating	60, 80 deg C, 30 Vac, Horizontal flame.

Conductor	36 AWG minimum, solid or stranded.

Insulation	Extruded PE, extruded foamed PE, extruded XLPE, extruded foamed XLPE, extruded FRPE, extruded foamed FRPE, extruded XLFRPE, extruded foamed XLFRPE, extruded FEP, extruded foamed FEP, extruded XLFEP, extruded foamed XLFEP, extruded PFA, extruded foamed PFA, extruded XLPFA, extruded foamed XLPFA, extruded PTFE, extruded foamed PTFE, extruded XLPTFE, extruded foamed XLPTFE, extruded PP, extruded foamed PP, extruded XLPP or extruded foamed XLPP, wall thickness may range from minimum 0.007 to 0.150 inches maximum.

Shield	Optional.

Inner Covering	Optional. Extruded PVC, extruded PE, extruded FRPE, extruded PFA, extruded FEP, extruded PTFE, extruded Nylon (polyamide), extruded ETFE, extruded polyester or extruded TPU, approx 0.002 inches thick, or non-extruded lacquered braid, or spiral wrap of minimum 0.0006 inches thick non-extruded PETP tape applied with approx 50 percent overlap.

Shield	Optional.

Outer Covering	Optional. Extruded PVC, extruded PE, extruded FRPE, extruded FEP, extruded PFA, extruded PTFE, extruded Nylon (polyamide), extruded ETFE, extruded polyester or extruded TPU, approx 0.002 inches thick, or spiral wrap of minimum 0.0006 inches thick non-extruded PETP tape applied with approx 50 percent overlap, or non-extruded lacquered braid.

Shield	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in appliances, electronic equipment and electronic business machines.