UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1376
                        
                            Issued:1965-03-04
                    
                            Revised:2012-04-19
                    
                            Style
                            1376
                        
                            Single-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 250 Vac, FT2 flame, 60 deg C Wet.
		
			ConductorSize varies - dependent upon wattage demand, solid or stranded.
		
			InsulationExtruded PVC, 30 mils min average. R/C QMTT2 compounds suitable for at least Type TW, or see Facing page.
		
			ShieldCopper braid consisting of bare copper. Combination of strand size and number of strands such that braid is equivalent to 18 AWG.
		
			JacketExtruded PVC, 20 mils min average, 16 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			Use"Thermoplastic Insulated Resistance Wire for Heating Cable Units" The conductor alloy designation shall be included in Ohms per foot rating (optional marking).
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1376	Issued:1965-03-04
			Revised:2012-04-19


Rating	90 deg C, 250 Vac, FT2 flame, 60 deg C Wet.

Conductor	Size varies - dependent upon wattage demand, solid or stranded.

Insulation	Extruded PVC, 30 mils min average. R/C QMTT2 compounds suitable for at least Type TW, or see Facing page.

Shield	Copper braid consisting of bare copper. Combination of strand size and number of strands such that braid is equivalent to 18 AWG.

Jacket	Extruded PVC, 20 mils min average, 16 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	"Thermoplastic Insulated Resistance Wire for Heating Cable Units" The conductor alloy designation shall be included in Ohms per foot rating (optional marking).