APPLIANCE WIRING MATERIAL
Subj.758 Section 1 Page 1381 Issued:1965-03-19
Revised:2012-02-01
Style 1381 Single conductor with extruded insulation

Rating60 or 80 deg C, 600 Vac, Horizontal flame
Conductor29 AWG - 20 AWG copper-clad steel, copper alloy bare, tinned or silver-coated, having a minimum 40 percent conductivity.
InsulationExtruded PE, 25 mils min average, 22 mils minimum at any point.
AssemblyOver the conductor shall be applied a spiral wrap of PE or FRPE thread nominally 35 mils in dia. approximately 0.5 in. between turns. This assembly shall be enclosed with an extruded PE or flame-retardant PE tube having an approximately 25 mil wall.
ShieldOptional.
JacketExtruded PVC, 32 mils min average, 26 mils minimum at any point.
StandardAppliance Wiring Material UL 758.
MarkingGeneral.
UseInternal wiring

UL and the UL Logo are trademarks of UL LLC © 2021