UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1382
                        
                            Issued:1965-03-19
                    
                            Revised:2012-06-29
                    
                            Style
                            1382
                        
                            Single conductor using non-integral jacket.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor29 AWG - 20 AWG copper, copper-clad steel, copper alloy, bare, tinned or silver-coated, having a minimum 40 per cent conductivity.
		
			InsulationExtruded PE or FRPE, 45 mils min average, 40 mils minimum at any point.
		
			AssemblyOver the conductor shall be applied a spiral wrap of PE or FRPE thread nominally 45 mils in dia. approximately 0.5 in. between turns. This assembly shall be enclosed with a flame-retardant polyethylene tube having an approximately 40 mil wall.
		
			ShieldOptional.
		
			JacketExtruded PVC, 25 mils min average thickness, 20 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1382	Issued:1965-03-19
			Revised:2012-06-29


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	29 AWG - 20 AWG copper, copper-clad steel, copper alloy, bare, tinned or silver-coated, having a minimum 40 per cent conductivity.

Insulation	Extruded PE or FRPE, 45 mils min average, 40 mils minimum at any point.

Assembly	Over the conductor shall be applied a spiral wrap of PE or FRPE thread nominally 45 mils in dia. approximately 0.5 in. between turns. This assembly shall be enclosed with a flame-retardant polyethylene tube having an approximately 40 mil wall.

Shield	Optional.

Jacket	Extruded PVC, 25 mils min average thickness, 20 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.