UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1387
                        
                            Issued:1965-05-13
                    
                            Revised:2011-10-14
                    
                            Style
                            1387
                        
                            Single Conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor26 AWG - 16 AWG, solid or stranded, tinned or bare.
		
			InsulationExtruded PE or extruded FRPE, 42 mils minimum average thickness, 38 mils minimum thickness at any point.
		
			BraidOptional.  Rayon, over primary insulation.
		
			ShieldShield shall consist of No. 36-30 AWG. tinned or bare copper strands applied as a braid or wrap, or a wrap of aluminum faced Polyester tape with a parallel, uninsulated drain wire.
		
			JacketExtruded PVC, 31 mils minimum average thickness, 25 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1387	Issued:1965-05-13
			Revised:2011-10-14


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	26 AWG - 16 AWG, solid or stranded, tinned or bare.

Insulation	Extruded PE or extruded FRPE, 42 mils minimum average thickness, 38 mils minimum thickness at any point.

Braid	Optional. Rayon, over primary insulation.

Shield	Shield shall consist of No. 36-30 AWG. tinned or bare copper strands applied as a braid or wrap, or a wrap of aluminum faced Polyester tape with a parallel, uninsulated drain wire.

Jacket	Extruded PVC, 31 mils minimum average thickness, 25 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In electronic equipment.