UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1437
                        
                            Issued:1967-07-14
                    
                            Revised:2012-07-03
                    
                            Style
                            1437
                        
                            Single Conductor with Extruded Insulation and Extruded Jacket.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor22 AWG solid bare copper or copper-covered steel wire.
		
			InsulationExtruded PE, 56 mils minimum thickness average, 50 mils minimum thickness at any point.
		
			Shield36 or 30 AWG, copper applied as a closely woven braid.
		
			JacketExtruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIntended as radio-frequency transmission cable.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1437	Issued:1967-07-14
			Revised:2012-07-03


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	22 AWG solid bare copper or copper-covered steel wire.

Insulation	Extruded PE, 56 mils minimum thickness average, 50 mils minimum thickness at any point.

Shield	36 or 30 AWG, copper applied as a closely woven braid.

Jacket	Extruded PVC, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Intended as radio-frequency transmission cable.