UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1445
                        
                            Issued:1967-11-17
                    
                            Revised:2011-12-13
                    
                            Style
                            1445
                        
                            Single Conductor with Extruded Insulation.
                    
			Rating90 deg C, 250 Vac, FT-2 flame, 60 deg C Wet.
		
			ConductorSize varies dependent upon wattage demand.
		
			InsulationExtruded PVC, 60 mils minimum average thickness, 54 mils minimum thickness at any point.
		
			ShieldBraid consisting of bare copper.  Combination of strand size and number of strands such that the braid is equivalent to 18 AWG.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.  
Optinoal - The conductor alloy designation shall be included in ohms per foot rating.
		
			UseThermoplastic insulated resistance wire for heating cable units where exposed to temperatures not exceeding 90 deg C; moisture resistant 60 deg C.  The conductor alloy designation shall be included in ohms per foot rating (optional marking ).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1445	Issued:1967-11-17
			Revised:2011-12-13


Rating	90 deg C, 250 Vac, FT-2 flame, 60 deg C Wet.

Conductor	Size varies dependent upon wattage demand.

Insulation	Extruded PVC, 60 mils minimum average thickness, 54 mils minimum thickness at any point.

Shield	Braid consisting of bare copper. Combination of strand size and number of strands such that the braid is equivalent to 18 AWG.

Standard	Appliance Wiring Material UL 758.

Marking	General. Optinoal - The conductor alloy designation shall be included in ohms per foot rating.

Use	Thermoplastic insulated resistance wire for heating cable units where exposed to temperatures not exceeding 90 deg C; moisture resistant 60 deg C. The conductor alloy designation shall be included in ohms per foot rating (optional marking ).