UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1451
                        
                            Issued:1968-06-07
                    
                            Revised:2012-07-24
                    
                            Style
                            1451
                        
                            Single Conductor with extruded insulation and non-integral jacket.
                    
			Rating90 deg C, 250 Vac, Horizontal flame.
		
			ConductorResistance Wire. Size varies dependant upon wattage demand.
		
			InsulationExtruded PVC, 30 mils minimum average, 27 mils minimum at any point.
		
			CoveringExtruded nylon, 3 mils minimum thickness. Apex Tire & Rubber No. 71, 74, or 75; Foster Grant No. 61CH, 61C or 61DTRH; Allied Chemical "Plaskon" 8200HS.

			JacketExtruded PE, 31 mils minimum average, 25 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. The Conductor alloy designation shall be included. Ohms per foot rating (Optional Marking).

			UseThermoplastic Insulated Resistance Wire for Heating Cable Units where exposed to temperatures not exceeding 90 C.

                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1451	Issued:1968-06-07
			Revised:2012-07-24


Rating	90 deg C, 250 Vac, Horizontal flame.

Conductor	Resistance Wire. Size varies dependant upon wattage demand.

Insulation	Extruded PVC, 30 mils minimum average, 27 mils minimum at any point.

Covering	Extruded nylon, 3 mils minimum thickness. Apex Tire & Rubber No. 71, 74, or 75; Foster Grant No. 61CH, 61C or 61DTRH; Allied Chemical "Plaskon" 8200HS.

Jacket	Extruded PE, 31 mils minimum average, 25 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General. The Conductor alloy designation shall be included. Ohms per foot rating (Optional Marking).

Use	Thermoplastic Insulated Resistance Wire for Heating Cable Units where exposed to temperatures not exceeding 90 C.