UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1454
                        
                            Issued:1968-06-20
                    
                            Revised:2011-08-04
                    
                            Style
                            1454
                        
                            Single conductor with extruded insulation.
                    
			Rating60 deg C, 30 Vac (jacket), Horizontal flame.
		
			Conductor30 - 20 AWG copper-clad steel, bare, tinned or silver-coated, having a minimum 40 percent conductivity, or copper alloy silver coated having a minimum 40 percent conductivity.
		
			InsulationExtruded FRPE, 15 mils min average, 13 mils minimum at any point.
		
			AssemblyOver the conductor shall be applied a spiral wrap of FRPE thread, a minimum 13 mils in diameter. This assembly shall be enclosed with a FRPE tube having a minimum 13 mil wall at any point.
		
			ShieldA shield over the insulation or optional drain wire shall consist of a bare or tinned copper braid. optional. A drain wire spirally wrapped over the tube shall consist of a No. 29 silver plated copper alloy.
		
			JacketExtruded PVC, 9 mils min average, 8 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn electronic equipment where exposed to a temperature not exceeding 60 deg C and where the jacket is exposed to a maximum operating potential of 30 volts.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1454	Issued:1968-06-20
			Revised:2011-08-04


Rating	60 deg C, 30 Vac (jacket), Horizontal flame.

Conductor	30 - 20 AWG copper-clad steel, bare, tinned or silver-coated, having a minimum 40 percent conductivity, or copper alloy silver coated having a minimum 40 percent conductivity.

Insulation	Extruded FRPE, 15 mils min average, 13 mils minimum at any point.

Assembly	Over the conductor shall be applied a spiral wrap of FRPE thread, a minimum 13 mils in diameter. This assembly shall be enclosed with a FRPE tube having a minimum 13 mil wall at any point.

Shield	A shield over the insulation or optional drain wire shall consist of a bare or tinned copper braid. optional. A drain wire spirally wrapped over the tube shall consist of a No. 29 silver plated copper alloy.

Jacket	Extruded PVC, 9 mils min average, 8 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In electronic equipment where exposed to a temperature not exceeding 60 deg C and where the jacket is exposed to a maximum operating potential of 30 volts.