UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1460
                        
                            Issued:1968-11-07
                    
                            Revised:2012-01-29
                    
                            Style
                            1460
                        
                            Single conductor cable with extruded insulation and jacket.
                    
			Rating80 deg C, 150 Vac (Jacket), Horizontal Flame.
		
			Conductor29 AWG - 20 AWG, solid or stranded round copper-clad steel, bare, tinned or silver-coated, having a minimum 40 per cent conductivity
.
		
			InsulationExtruded FRPP, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			AssemblyOver the conductor shall be applied a spiral wrap of FRPP thread nominally 15 mils in diameter, approximately 0.5 in. between turns. This assembly shall be enclosed with a FRPP tube having an approximately 15 mil wall.
		
			ShieldA shield over the tube shall consist of a bare or tinned copper braid. A drain wire may be applied under the shield
		
			JacketExtruded PVC, 9 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1460	Issued:1968-11-07
			Revised:2012-01-29


Rating	80 deg C, 150 Vac (Jacket), Horizontal Flame.

Conductor	29 AWG - 20 AWG, solid or stranded round copper-clad steel, bare, tinned or silver-coated, having a minimum 40 per cent conductivity .

Insulation	Extruded FRPP, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Assembly	Over the conductor shall be applied a spiral wrap of FRPP thread nominally 15 mils in diameter, approximately 0.5 in. between turns. This assembly shall be enclosed with a FRPP tube having an approximately 15 mil wall.

Shield	A shield over the tube shall consist of a bare or tinned copper braid. A drain wire may be applied under the shield

Jacket	Extruded PVC, 9 mils minimum average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.