UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1461
                        
                            Issued:1968-10-07
                    
                            Revised:2012-04-20
                    
                            Style
                            1461
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac (Jacket), Horizontal flame.
		
			Conductor26 AWG - 20 AWG solid or stranded round, copper-clad steel, bare, tinned or silver- coated, having a minimum 40 per cent conductivity.
		
			InsulationFRPP. Over the conductor shall be applied a spiral wrap of FRPP thread nominally 25 mils in diameter, approximately 0.5 in. between turns. This assembly shall be enclosed with a FRPP tube having an approximately 20 mil wall.
		
			ShieldA shield over the tube shall consist of a bare or tinned copper braid. A drain wire may be applied under the shield.
		
			JacketPVC, 18 mils min average, 14 mils minimum at any point. (outer jacket)
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn electronic equipment where exposed to a temperature not exceeding 80 deg C and where the Jacket is exposed to a maximum operating potential of 300 Volts.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1461	Issued:1968-10-07
			Revised:2012-04-20


Rating	80 deg C, 300 Vac (Jacket), Horizontal flame.

Conductor	26 AWG - 20 AWG solid or stranded round, copper-clad steel, bare, tinned or silver- coated, having a minimum 40 per cent conductivity.

Insulation	FRPP. Over the conductor shall be applied a spiral wrap of FRPP thread nominally 25 mils in diameter, approximately 0.5 in. between turns. This assembly shall be enclosed with a FRPP tube having an approximately 20 mil wall.

Shield	A shield over the tube shall consist of a bare or tinned copper braid. A drain wire may be applied under the shield.

Jacket	PVC, 18 mils min average, 14 mils minimum at any point. (outer jacket)

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In electronic equipment where exposed to a temperature not exceeding 80 deg C and where the Jacket is exposed to a maximum operating potential of 300 Volts.