UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1473
                        
                            Issued:1969-09-19
                    
                            Revised:2012-04-25
                    
                            Style
                            1473
                        
                            Single conductor with extruded insulation.
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			ConductorMinimum 1.75 mils diameter resistance wire wound for a minimum of 25 turns per inch on a Rayon, Cotton, Polyester or Fiberglass yarn core.
		
			InsulationExtruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			ShieldA closely woven aluminum braid shall be provided over the heater wire.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Refrigerator Mullion Heating where not subjected to repeated flexing in use.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1473	Issued:1969-09-19
			Revised:2012-04-25


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	Minimum 1.75 mils diameter resistance wire wound for a minimum of 25 turns per inch on a Rayon, Cotton, Polyester or Fiberglass yarn core.

Insulation	Extruded PVC, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Shield	A closely woven aluminum braid shall be provided over the heater wire.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Refrigerator Mullion Heating where not subjected to repeated flexing in use.