UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1476
                        
                            Issued:1969-12-16
                    
                            Revised:2012-01-30
                    
                            Style
                            1476
                        
                            Single insulated conductor with other-than-extruded covering.
                    
			Rating60 deg C, 208 Vac, FT1 flame.
		
			Conductor14 or 12 AWG solid, Type TW wire.
		
			InsulationType TW insulated wire, the insulation shall be Blue in color to indicate 208 volt rating.
		
			WrapPaper wrap over insulation - Formed of four pieces of moisture resistant crepe type Kraft paper, 1 by 0.005 inch, or 1.5 by 0.003 inch, applied in a manner as to provide 5 thickness of paper over the labelled conductor with an approximate 0.1875 in. overlap between pieces.
		
			CoveringGlass or Combination Cotton-Glass braid saturated with a flame-ratardant and moisture-resistant impregnant.
		
			CoveringOptional. The over-all cable may be finished with an aluminum paint or white paint.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseOnly as factory assembled Non-Heating Leads on Radiant Heating Cable Units.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1476	Issued:1969-12-16
			Revised:2012-01-30


Rating	60 deg C, 208 Vac, FT1 flame.

Conductor	14 or 12 AWG solid, Type TW wire.

Insulation	Type TW insulated wire, the insulation shall be Blue in color to indicate 208 volt rating.

Wrap	Paper wrap over insulation - Formed of four pieces of moisture resistant crepe type Kraft paper, 1 by 0.005 inch, or 1.5 by 0.003 inch, applied in a manner as to provide 5 thickness of paper over the labelled conductor with an approximate 0.1875 in. overlap between pieces.

Covering	Glass or Combination Cotton-Glass braid saturated with a flame-ratardant and moisture-resistant impregnant.

Covering	Optional. The over-all cable may be finished with an aluminum paint or white paint.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Only as factory assembled Non-Heating Leads on Radiant Heating Cable Units.