UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1477
                        
                            Issued:1970-01-07
                    
                            Revised:2014-06-16
                    
                            Style
                            1477
                        
                            Single conductor with extruded insulation and non-integral jacket
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure. 30 AWG minimum.
		
			CoveringOptional. A barrier layer if employed, may be a fibrous wrap, serving or braid; Paper; Nylon: oriented Polyethylene terephthalate; or a thermoplastic tape wrap.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1477	Issued:1970-01-07
			Revised:2014-06-16


Rating	80 deg C, 300 Vac, Cable flame.

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure. 30 AWG minimum.

Covering	Optional. A barrier layer if employed, may be a fibrous wrap, serving or braid; Paper; Nylon: oriented Polyethylene terephthalate; or a thermoplastic tape wrap.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection.