UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1518
                        
                            Issued:1971-05-10
                    
                            Revised:2012-06-11
                    
                            Style
                            1518
                        
                            Single conductor with non-integral jacket
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor26 AWG - 16 AWG.
		
			InsulationExtruded PE, 31 mils min average, 28 mils minimum at any point.
		
			ShieldShielding over conductor insulation shall consist of 38-30 AWG, tinned or untinned copper strands applied as a wrapper or braid; or a wrap of aluminum faced Polyester tape with a parallel un- insulated drain wire.
		
			BraidLacquered glass under shield.
		
			JacketExtruded PVC, 31 mils min average, 25 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Electronic Use In Non-hazardous Locations.
		
                UL and the UL Logo are trademarks of UL LLC © 2026

Subj.758	Section 1	Page 1518	Issued:1971-05-10
			Revised:2012-06-11


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	26 AWG - 16 AWG.

Insulation	Extruded PE, 31 mils min average, 28 mils minimum at any point.

Shield	Shielding over conductor insulation shall consist of 38-30 AWG, tinned or untinned copper strands applied as a wrapper or braid; or a wrap of aluminum faced Polyester tape with a parallel un- insulated drain wire.

Braid	Lacquered glass under shield.

Jacket	Extruded PVC, 31 mils min average, 25 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Electronic Use In Non-hazardous Locations.