UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1520
                        
                            Issued:1971-06-02
                    
                            Revised:2013-02-21
                    
                            Style
                            1520
                        
                            Single-conductor cable using non-integral jacket
                    
			Rating60 deg C, 300 Vac, Horizontal Flame.
		
			Conductor26 - 16 AWG, Solid or stranded.
		
			InsulationExtruded PE, 20 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			ShieldShielding over conductor insulation shall consist of 38-30 AWG, tinned or untinned copper strands applied as a wrap or braid or a wrap of aluminum faced Polyesters tape with a parallel uninsulated drain wire.
		
			JacketExtruded PVC, 22 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1520	Issued:1971-06-02
			Revised:2013-02-21


Rating	60 deg C, 300 Vac, Horizontal Flame.

Conductor	26 - 16 AWG, Solid or stranded.

Insulation	Extruded PE, 20 mils minimum average thickness, 18 mils minimum thickness at any point.

Shield	Shielding over conductor insulation shall consist of 38-30 AWG, tinned or untinned copper strands applied as a wrap or braid or a wrap of aluminum faced Polyesters tape with a parallel uninsulated drain wire.

Jacket	Extruded PVC, 22 mils minimum average thickness, 18 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.