UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1526
                        
                            Issued:1971-06-29
                    
                            Revised:2012-07-24
                    
                            Style
                            1526
                        
                            Single Conductor with Extruded Insulation.
                    
			Rating75 deg C, 120 Vac, Horizontal flame.
		
			ConductorA copper cadmium alloy ("Hitenso") or copper silver alloy wire flattened to 2 mils thickness, 8 mils width
		
			InsulationExtruded PVC, 18 mils min average, 16 mils minimum at any point.
		
			AssemblyA copper cadmium alloy ("Hitenso") or copper silver alloy wire flattened to 2 mils thickness, 8 mils width applied at approximately 30-36 turns per inch over a glass fiber yarn core. Over this assembly shall be applied 8 mils min. at any point of Temperature and Impedance Sensitive Thermoplastic. Over this covering, a second copper cadmium alloy ("Hitenso") or copper silver alloy flattened to 2 mils thickness, 8 mils width applied at approximately 17-25 turns per inch.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring and High Resistance Heater Wire.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1526	Issued:1971-06-29
			Revised:2012-07-24


Rating	75 deg C, 120 Vac, Horizontal flame.

Conductor	A copper cadmium alloy ("Hitenso") or copper silver alloy wire flattened to 2 mils thickness, 8 mils width

Insulation	Extruded PVC, 18 mils min average, 16 mils minimum at any point.

Assembly	A copper cadmium alloy ("Hitenso") or copper silver alloy wire flattened to 2 mils thickness, 8 mils width applied at approximately 30-36 turns per inch over a glass fiber yarn core. Over this assembly shall be applied 8 mils min. at any point of Temperature and Impedance Sensitive Thermoplastic. Over this covering, a second copper cadmium alloy ("Hitenso") or copper silver alloy flattened to 2 mils thickness, 8 mils width applied at approximately 17-25 turns per inch.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring and High Resistance Heater Wire.