UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1535
                        
                            Issued:1971-12-22
                    
                            Revised:2011-07-21
                    
                            Style
                            1535
                        
                            Multiple-Conductor Cable Using Non-Integral Jacket
                    
			Rating60 deg C, 150 Vac, Horizontal flame.
		
			Conductor29 AWG - 20 AWG Stranded or Solid
		
			InsulationFRPE, 15 mils minimum average thickness, 13 mils minimum thickness at any point, approximately 0.5 inch between turns. This assembly shall be enclosed with a FRPE tube, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			ShieldA shield over the tube shall consist of a bare or tinned copper braid, or a wrap of aluminum faced Polyester tape. A drain wire may be applied under the shield.
		
			JacketPVC, 9 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn electronic equipment where the jacket is exposed to a maximum operating potential of 150 volts.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1535	Issued:1971-12-22
			Revised:2011-07-21


Rating	60 deg C, 150 Vac, Horizontal flame.

Conductor	29 AWG - 20 AWG Stranded or Solid

Insulation	FRPE, 15 mils minimum average thickness, 13 mils minimum thickness at any point, approximately 0.5 inch between turns. This assembly shall be enclosed with a FRPE tube, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Shield	A shield over the tube shall consist of a bare or tinned copper braid, or a wrap of aluminum faced Polyester tape. A drain wire may be applied under the shield.

Jacket	PVC, 9 mils minimum average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In electronic equipment where the jacket is exposed to a maximum operating potential of 150 volts.