UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1556
                        
                            Issued:1972-06-08
                    
                            Revised:2011-09-09
                    
                            Style
                            1556
                        
                            Jacketed Cable.
                    
			Rating60 deg C, 300 Vac (Jacket), VW-1 flame.
		
			Conductor26 AWG - 20 AWG copper-clad steel, or copper alloy, bare tinned or silver coated.
		
			InsulationPE, 25 mils min average, 22 mils minimum at any point.
		
			AssemblyOver the conductor shall be applied a spiral wrap of non-flame-retardant polyethylene thread, 25 mils min. avg. in diameter, approximately 0.375 in. between turns. This assembly shall be enclosed with a non-flame-retard- ant polyethylene tube having an approximately 25 mil min avg. wall.
		
			ShieldA shield over the nylon covered tube shall consist of a bare or tinned copper braid or a wrap of aluminum faced mylar tape with a parallel uninsulated drain wire.
		
			CoveringOptional. Extruded nylon covering, 3 mils min. avg., 2 mils minimum at any point may be applied over the tube.
		
			JacketPVC, 25 mils min average, 23 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of television sets, home entertainment and electronic equipment where the jacket is exposed to a maximum operating potential of 300 volts.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1556	Issued:1972-06-08
			Revised:2011-09-09


Rating	60 deg C, 300 Vac (Jacket), VW-1 flame.

Conductor	26 AWG - 20 AWG copper-clad steel, or copper alloy, bare tinned or silver coated.

Insulation	PE, 25 mils min average, 22 mils minimum at any point.

Assembly	Over the conductor shall be applied a spiral wrap of non-flame-retardant polyethylene thread, 25 mils min. avg. in diameter, approximately 0.375 in. between turns. This assembly shall be enclosed with a non-flame-retard- ant polyethylene tube having an approximately 25 mil min avg. wall.

Shield	A shield over the nylon covered tube shall consist of a bare or tinned copper braid or a wrap of aluminum faced mylar tape with a parallel uninsulated drain wire.

Covering	Optional. Extruded nylon covering, 3 mils min. avg., 2 mils minimum at any point may be applied over the tube.

Jacket	PVC, 25 mils min average, 23 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of television sets, home entertainment and electronic equipment where the jacket is exposed to a maximum operating potential of 300 volts.