APPLIANCE WIRING MATERIAL

Subj.758	Section 1	Page 1585	Issued:1973-03-21
			Revised:2008-05-27

Style 1585

Jacketed Cable.

Rating

60 deg C, 30 Vac, Horizontal flame.

Conductor

32 AWG - 20 AWG solid or stranded round, copper, copper-clad steel, copper alloy bare, tinned or silver-coated, havinga minimum of 40 percent conductivity.

Insulation

XLPE, 15 mils min average, 13 mils minimum at any point. Over the conductor shall be applied a spiral wrap of irradiated solid or cellular flame-retardant polyethylene or nonflame-retardant polyethylene thread nominally 15 mils in diameter, approximately 1/2 in. between turns. This assembly shall be enclosed with an irradiated solid or cellular flame-retardant polyethylene or nonflame-retardant polyethylene tube having an approximately 15 mil wall.

Shield

Bare or tinned copper braid, or a wrap of aluminum faced Polyester tape. A drain wire may be applied under the shield.

Jacket

PVC, 9 mils min average, 8 mils min at any point.

Standard

Appliance Wiring Material UL 758.

Marking

General.

Use	Internal wiring of electronic equipment, Class 2 wiring systems.

 
UL and the UL Logo are trademarks of UL LLC © 2025