UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1588
                        
                            Issued:1973-04-16
                    
                            Revised:2011-09-09
                    
                            Style
                            1588
                        
                            Insulated Wire.
                    
			Rating60 deg C, 277 Vac, vertical flame.
		
			Conductor14 or 12 AWG solid round, tinned or bare copper.
		
			InsulationLabeled type TW. The insulation shall be brown in color.
		
			CoveringOuter Covering - Cotton, Glass or combination Cotton-Glass braid saturated with a flame-retardant and moisture-resistant impregnant.
		
			Misc.Paper wrap under covering - Formed of four pieces of moisture resistant crepe type Kraft paper, 1 by 0.005 inch, or 1-1/2 by 0.003 inch, applied in a manner as to provide 5 thickness of paper over the labelled Type TW conductor with an approximate 3/16 in. overlap between pieces. The outer covering (optional) may be finished with an aluminum paint or white paint.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseOnly as factory assembled Non-Heating Leads on Radiant Heating Cable Units.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1588	Issued:1973-04-16
			Revised:2011-09-09


Rating	60 deg C, 277 Vac, vertical flame.

Conductor	14 or 12 AWG solid round, tinned or bare copper.

Insulation	Labeled type TW. The insulation shall be brown in color.

Covering	Outer Covering - Cotton, Glass or combination Cotton-Glass braid saturated with a flame-retardant and moisture-resistant impregnant.

Misc.	Paper wrap under covering - Formed of four pieces of moisture resistant crepe type Kraft paper, 1 by 0.005 inch, or 1-1/2 by 0.003 inch, applied in a manner as to provide 5 thickness of paper over the labelled Type TW conductor with an approximate 3/16 in. overlap between pieces. The outer covering (optional) may be finished with an aluminum paint or white paint.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Only as factory assembled Non-Heating Leads on Radiant Heating Cable Units.