UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1594
                        
                            Issued:1973-05-29
                    
                            Revised:2012-07-10
                    
                            Style
                            1594
                        
                            Single or multiple conductor with extruded insulation
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor30 AWG min. solid or stranded round.
		
			InsulationSolid or Cellular PE or XLPE. Wall thickness may range from 7 mils to 100 mils (may be either tube and thread or pressure extruded).
		
			ShieldNon ferrous metallic braid or wrap; a wrap of aluminum-faced oriented polyethylene terephthalate (Polyester) tape with an uninsulated drain wire.
		
			CoveringExtruded polyvinyl chloride, the minimum at any point wall thickness may range from 7 mils to 45 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment, Class 2 wiring systems.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1594	Issued:1973-05-29
			Revised:2012-07-10


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	30 AWG min. solid or stranded round.

Insulation	Solid or Cellular PE or XLPE. Wall thickness may range from 7 mils to 100 mils (may be either tube and thread or pressure extruded).

Shield	Non ferrous metallic braid or wrap; a wrap of aluminum-faced oriented polyethylene terephthalate (Polyester) tape with an uninsulated drain wire.

Covering	Extruded polyvinyl chloride, the minimum at any point wall thickness may range from 7 mils to 45 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment, Class 2 wiring systems.