UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1596
                        
                            Issued:1973-06-08
                    
                            Revised:2013-03-04
                    
                            Style
                            1596
                        
                            Single-conductor cable using non-integral jacket
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor30 AWG minimum, solid or stranded.
		
			InsulationSolid or foamed extruded PE, FRPE, XLPE or XLFRPE, 7 mils minimum thickness at any point, 100 mils maximum thickness.
		
			CoveringOptional. Extruded PVC, Nylon, or Polyester, 2 mils minimum thickness at any point, or lacquered braid.
		
			ShieldNon-ferous metallic braid or wrap; a wrap of aluminum- faced (one or both sides) PET tape with uninsulated drain wire or wires may be used.
		
			JacketExtruded PVC, 16 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			ShieldNonferrous metallic braid or wrap; a wrap of aluminum faced (one or both sides) PET tape with uninsulated drain wire or wires may be used when the optional covering is employed.
		
			JacketExtruded PVC, 16 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment, Class 2 wiring systems.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1596	Issued:1973-06-08
			Revised:2013-03-04


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	30 AWG minimum, solid or stranded.

Insulation	Solid or foamed extruded PE, FRPE, XLPE or XLFRPE, 7 mils minimum thickness at any point, 100 mils maximum thickness.

Covering	Optional. Extruded PVC, Nylon, or Polyester, 2 mils minimum thickness at any point, or lacquered braid.

Shield	Non-ferous metallic braid or wrap; a wrap of aluminum- faced (one or both sides) PET tape with uninsulated drain wire or wires may be used.

Jacket	Extruded PVC, 16 mils minimum average thickness, 13 mils minimum thickness at any point.

Shield	Nonferrous metallic braid or wrap; a wrap of aluminum faced (one or both sides) PET tape with uninsulated drain wire or wires may be used when the optional covering is employed.

Jacket	Extruded PVC, 16 mils minimum average thickness, 13 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment, Class 2 wiring systems.