UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1597
                        
                            Issued:1973-07-09
                    
                            Revised:2012-12-06
                    
                            Style
                            1597
                        
                            Single Conductor with Extruded Insulation
                    
			Rating80 deg C, No Voltage Specified, Horizontal flame.
		
			Conductor32 AWG minimum, solid or stranded.
		
			InsulationFRPE, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			ShieldOptional.
		
			AssemblyA spiral wrap of FRPE thread, 15 mils minimum diameter or heavier, applied over the conductor, approximately 1/2 inch between turns. This assembly shall be enclosed with a FRPE tube having 15 mils average thickness.
		
			CoveringInner covering - (Optional) - Extruded PVC, Nylon or polyester approximately 0.002 inch thick or lacquered braid. Non-Ferrous metallic braid or wrap. Outer covering - (Optional) - Extruded PVC, Nylon or polyester approximately 0.002 inch thick or lacquered braid.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1597	Issued:1973-07-09
			Revised:2012-12-06


Rating	80 deg C, No Voltage Specified, Horizontal flame.

Conductor	32 AWG minimum, solid or stranded.

Insulation	FRPE, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Shield	Optional.

Assembly	A spiral wrap of FRPE thread, 15 mils minimum diameter or heavier, applied over the conductor, approximately 1/2 inch between turns. This assembly shall be enclosed with a FRPE tube having 15 mils average thickness.

Covering	Inner covering - (Optional) - Extruded PVC, Nylon or polyester approximately 0.002 inch thick or lacquered braid. Non-Ferrous metallic braid or wrap. Outer covering - (Optional) - Extruded PVC, Nylon or polyester approximately 0.002 inch thick or lacquered braid.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.