UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1608
                        
                            Issued:1973-09-25
                    
                            Revised:2012-07-24
                    
                            Style
                            1608
                        
                            Single Conductor with extruded insulation.
                    
			Rating90 deg C, 250 Vac, Cable flame, 75 deg C Wet.
		
			ConductorMinimum 0.0025 inch diameter resistance wire wound for a minimum 20 turns per inch on a Rayon or Polyester yarn core or a nickel, copper, or copper-alloy.  Size dependent upon wattage demand.
		
			InsulationExtruded PVC, 40 mils minimum average thickness, 36 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.  The conductor alloy designation shall be included, Ohms per foot rating may be included (optional marking).
		
			Use"Thermoplastic Insulated Resistance Wire for Heating Cable Units where exposed to temperatures not exceeding 90 deg C.  The conductor alloy designation shall be included Ohms per foot rating may be included (optional marking).
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1608	Issued:1973-09-25
			Revised:2012-07-24


Rating	90 deg C, 250 Vac, Cable flame, 75 deg C Wet.

Conductor	Minimum 0.0025 inch diameter resistance wire wound for a minimum 20 turns per inch on a Rayon or Polyester yarn core or a nickel, copper, or copper-alloy. Size dependent upon wattage demand.

Insulation	Extruded PVC, 40 mils minimum average thickness, 36 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General. The conductor alloy designation shall be included, Ohms per foot rating may be included (optional marking).

Use	"Thermoplastic Insulated Resistance Wire for Heating Cable Units where exposed to temperatures not exceeding 90 deg C. The conductor alloy designation shall be included Ohms per foot rating may be included (optional marking).