UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1675
                        
                            Issued:1975-12-05
                    
                            Revised:2011-11-09
                    
                            Style
                            1675
                        
                            Single-conductor cable with non-extruded jacket.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, material not specified
		
			InsulationExtruded ETFE, extruded FEP or extruded PTFE, 8 mils minimum average thickness, 6 mils minimum thickness at any point.
		
			CoveringOptional, polyester in the form of a spiral wrap 1.0 mil minimum thickness.
		
			ShieldOptional.
		
			JacketPETP tape spiral wrapped with polyester or PVC adhesive, 3 mils minimum average thickness, 2 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1675	Issued:1975-12-05
			Revised:2011-11-09


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, material not specified

Insulation	Extruded ETFE, extruded FEP or extruded PTFE, 8 mils minimum average thickness, 6 mils minimum thickness at any point.

Covering	Optional, polyester in the form of a spiral wrap 1.0 mil minimum thickness.

Shield	Optional.

Jacket	PETP tape spiral wrapped with polyester or PVC adhesive, 3 mils minimum average thickness, 2 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.