UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1720
                        
                            Issued:1977-06-22
                    
                            Revised:2011-08-04
                    
                            Style
                            1720
                        
                            Single Conductor with Extruded Insulation and Extruded Non-Integral Jacket
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor40 AWG minimum
		
			InsulationExtruded PE or extruded cellular PE or extruded FRPE or extruded cellular FRPE or extruded XLPE or extruded cellular XLPE, 15 mils minimum thickness at any point, 125 mils maximum thickness at any point.  The insulation may be applied directly over the conductor or applied as a spiral wrapped PE thread (5 mils minimum thickness at any point, 40 mils maximum thickness at any point) and enclosed with "tubed on" insulation.
		
			AssemblyInsulated conductor with optional covering, inner shield, inner jacket, outer shield, optional separator and outer jacket.
		
			CoveringOptional - Extruded PVC, Polyamide, Polyester, PVDF, ETFE or lacquered braids, 2 mils min. at any point.
		
			Inner ShieldIn accordance with the Standard
		
			Inner JacketExtruded PVC or extruded Nylon or extruded Polyester or extruded PVDF or extruded ETFE, 15 mils minimum thickness at any point; or lacquered braid.
		
			Outer ShieldIn accordance with the Standard
		
			SeparatorOptional - Paper
		
			Outer JacketExtruded PVC, 15 mils minimum thickness at any point
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1720	Issued:1977-06-22
			Revised:2011-08-04


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	40 AWG minimum

Insulation	Extruded PE or extruded cellular PE or extruded FRPE or extruded cellular FRPE or extruded XLPE or extruded cellular XLPE, 15 mils minimum thickness at any point, 125 mils maximum thickness at any point. The insulation may be applied directly over the conductor or applied as a spiral wrapped PE thread (5 mils minimum thickness at any point, 40 mils maximum thickness at any point) and enclosed with "tubed on" insulation.

Assembly	Insulated conductor with optional covering, inner shield, inner jacket, outer shield, optional separator and outer jacket.

Covering	Optional - Extruded PVC, Polyamide, Polyester, PVDF, ETFE or lacquered braids, 2 mils min. at any point.

Inner Shield	In accordance with the Standard

Inner Jacket	Extruded PVC or extruded Nylon or extruded Polyester or extruded PVDF or extruded ETFE, 15 mils minimum thickness at any point; or lacquered braid.

Outer Shield	In accordance with the Standard

Separator	Optional - Paper

Outer Jacket	Extruded PVC, 15 mils minimum thickness at any point

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electronic Equipment.