UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1721
                        
                            Issued:1977-07-18
                    
                            Revised:2011-07-29
                    
                            Style
                            1721
                        
                            Single Conductor with Extruded Insulation and Covering
                    
			Rating80 deg C, 30 Vac, Horizontal flame
		
			ConductorMinimum 40 AWG
		
			InsulationTFE, FEP, PVDF or ETFE, 3 mils minimum thickness at any point, 40 mils maximum thickness at any point. The insulation may be applied directly over the conductor or applied as a spiral wrapped TFE, PFA, FEP, PVDF or ETFE thread with 5 mils minimum thickness at any point, 40 mils maximum thickness at any point and enclosed with "tubed on" insulation.
		
			ShieldOptional.
		
			CoveringInner covering - Optional. Extruded PVC, XLPVC, nylon, TFE, FEP PVDF, ETFE or laquered braid, 2 mils minimum thickness at any point, or 0.5 mils or heavier polyester film. Required over metal faced polyester tape shield. Outer covering - Only optional over braided metal shield. Extruded PVC XLPVC, nylon, FEP, PVDF, ETFE or lacquered braid, 2 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1721	Issued:1977-07-18
			Revised:2011-07-29


Rating	80 deg C, 30 Vac, Horizontal flame

Conductor	Minimum 40 AWG

Insulation	TFE, FEP, PVDF or ETFE, 3 mils minimum thickness at any point, 40 mils maximum thickness at any point. The insulation may be applied directly over the conductor or applied as a spiral wrapped TFE, PFA, FEP, PVDF or ETFE thread with 5 mils minimum thickness at any point, 40 mils maximum thickness at any point and enclosed with "tubed on" insulation.

Shield	Optional.

Covering	Inner covering - Optional. Extruded PVC, XLPVC, nylon, TFE, FEP PVDF, ETFE or laquered braid, 2 mils minimum thickness at any point, or 0.5 mils or heavier polyester film. Required over metal faced polyester tape shield. Outer covering - Only optional over braided metal shield. Extruded PVC XLPVC, nylon, FEP, PVDF, ETFE or lacquered braid, 2 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in Electronic Equipment.