UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1745
                        
                            Issued:1978-03-08
                    
                            Revised:2012-02-01
                    
                            Style
                            1745
                        
                            Single conductor with extruded insulation.
                    
			Rating90 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, material not specified.
		
			InsulationSolid or cellular PTFE, PFA, FEP, ETFE; Polyimide, PETP tape with a PVC, or polyester adhesive, or combination thereof; or Heat sealed PTFE, PFA or FEP tape 3 mils minimum at any point
		
			AssemblyInsulated conductor is built with optional inner covering, optional inner shield, optional middle covering, optional outer shield and optional outer covering.
		
			ShieldOptional.
		
			CoveringInner covering - (Optional) 2 mils minimum at any point of Extruded polybutylene terephthalate, PTFE or FEP, ETFE, PVC or PFA; 2 mils minimum at any point PETP tape with a PVC or polyester adhesive or combination thereof; 0.5 mils minimum polyester terephthalate tape with PVC adhesive; or Heat sealed PTFE, PFA or FEP tape. Middle covering & Outer covering - (both optional) same as inner covering.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1745	Issued:1978-03-08
			Revised:2012-02-01


Rating	90 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, material not specified.

Insulation	Solid or cellular PTFE, PFA, FEP, ETFE; Polyimide, PETP tape with a PVC, or polyester adhesive, or combination thereof; or Heat sealed PTFE, PFA or FEP tape 3 mils minimum at any point

Assembly	Insulated conductor is built with optional inner covering, optional inner shield, optional middle covering, optional outer shield and optional outer covering.

Shield	Optional.

Covering	Inner covering - (Optional) 2 mils minimum at any point of Extruded polybutylene terephthalate, PTFE or FEP, ETFE, PVC or PFA; 2 mils minimum at any point PETP tape with a PVC or polyester adhesive or combination thereof; 0.5 mils minimum polyester terephthalate tape with PVC adhesive; or Heat sealed PTFE, PFA or FEP tape. Middle covering & Outer covering - (both optional) same as inner covering.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits.