UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1824
                        
                            Issued:1980-05-28
                    
                            Revised:2012-03-23
                    
                            Style
                            1824
                        
                            Single Conductor with Non-Extruded Insulation and Extruded Non-Integral Jacket.
                    
			Rating200 deg C, 300 Vac, Horizontal Flame.
		
			ConductorNickel or silver plated nickel, copper, iron, steel, alloy or other suitable resistance wire. (Size and alloy dependent upon wattage demand).
		
			InsulationNon-Extruded PTFE tape, 13 mils min average, 12 mils minimum at any point with an overwrap of Non-Extruded PTFE/Glass tape, 3 mils minimum at any point.
		
			ShieldOptional.
		
			JacketExtruded FEP, 13 mils min average, 12 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseResistance wire for use in heating cable units where the acceptability of the combination is to be determined by Underwriter Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1824	Issued:1980-05-28
			Revised:2012-03-23


Rating	200 deg C, 300 Vac, Horizontal Flame.

Conductor	Nickel or silver plated nickel, copper, iron, steel, alloy or other suitable resistance wire. (Size and alloy dependent upon wattage demand).

Insulation	Non-Extruded PTFE tape, 13 mils min average, 12 mils minimum at any point with an overwrap of Non-Extruded PTFE/Glass tape, 3 mils minimum at any point.

Shield	Optional.

Jacket	Extruded FEP, 13 mils min average, 12 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Resistance wire for use in heating cable units where the acceptability of the combination is to be determined by Underwriter Laboratories Inc.