UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1830
                        
                            Issued:1980-09-25
                    
                            Revised:2011-09-14
                    
                            Style
                            1830
                        
                            Single conductor with extruded insulation.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, material not specified.
		
			InsulationFRPE or PE or XLPE, solid or Cellular, 5 mils minimum at any point, 125 mils maximum.
		
			AssemblyThe insulation is applied directly over the conductor or applied as a spiral wrapped Polyethylene thread (5 mils minimum, 40 mils maximum) and enclosed with "tubed on" insulation.
		
			ShieldOptional.
		
			CoveringInner covering - (Optional) Extruded PVC or heat sealed PVC tape, Polyamide, Polyester, PVDF, ETFE or lacquered braids, 2 mils minimum at any point or 0.5 mil or heavier Polyester film. Outer covering - (1) Not required over aluminum-faced Polyester tape. (2) Optional over shield. Extruded PVC or heat sealed PVC tape, Polyamide, Polyester, PVDF, ETFE, Irradiated PE, Irradiated PVC or lacquered braid, 2 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs insulated singles in external interconnection cable for electronic equipment, Class 2 wiring systems.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1830	Issued:1980-09-25
			Revised:2011-09-14


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, material not specified.

Insulation	FRPE or PE or XLPE, solid or Cellular, 5 mils minimum at any point, 125 mils maximum.

Assembly	The insulation is applied directly over the conductor or applied as a spiral wrapped Polyethylene thread (5 mils minimum, 40 mils maximum) and enclosed with "tubed on" insulation.

Shield	Optional.

Covering	Inner covering - (Optional) Extruded PVC or heat sealed PVC tape, Polyamide, Polyester, PVDF, ETFE or lacquered braids, 2 mils minimum at any point or 0.5 mil or heavier Polyester film. Outer covering - (1) Not required over aluminum-faced Polyester tape. (2) Optional over shield. Extruded PVC or heat sealed PVC tape, Polyamide, Polyester, PVDF, ETFE, Irradiated PE, Irradiated PVC or lacquered braid, 2 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As insulated singles in external interconnection cable for electronic equipment, Class 2 wiring systems.