UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1850
                        
                            Issued:1981-07-21
                    
                            Revised:2012-04-25
                    
                            Style
                            1850
                        
                            Single-conductor wire using non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Conductor30 AWG - 24 AWG, solid or stranded.
		
			InsulationExtruded PE, extruded FRPE, extruded PP, extruded FEP, extruded foamed PE, extruded foamed FRPE, extruded foamed PP or extruded foamed FEP, 19 - 30 mils minimum average thickness.
		
			ShieldLongitudinally applied aluminum/polyester tape with 30 AWG copper drain wire.
		
			JacketExtruded PVC, 5 mils minimum average thickness, 4 mils minimum thickness at any point. The jacket has a trapezoidal cross-section with approx dimensions of 0.450 by 0.085 inch.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring in Class 2 Circuits of electronic equipment. Cable must be installed under carpet squares and not exposed above carpet level.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1850	Issued:1981-07-21
			Revised:2012-04-25


Rating	60 deg C, 30 Vac, Cable flame.

Conductor	30 AWG - 24 AWG, solid or stranded.

Insulation	Extruded PE, extruded FRPE, extruded PP, extruded FEP, extruded foamed PE, extruded foamed FRPE, extruded foamed PP or extruded foamed FEP, 19 - 30 mils minimum average thickness.

Shield	Longitudinally applied aluminum/polyester tape with 30 AWG copper drain wire.

Jacket	Extruded PVC, 5 mils minimum average thickness, 4 mils minimum thickness at any point. The jacket has a trapezoidal cross-section with approx dimensions of 0.450 by 0.085 inch.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring in Class 2 Circuits of electronic equipment. Cable must be installed under carpet squares and not exposed above carpet level.