UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1874
                        
                            Issued:1982-08-05
                    
                            Revised:2012-03-23
                    
                            Style
                            1874
                        
                            Single-conductor cable using non-integral covering.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationInner layer - extruded fomaed PE, Outer layer - extruded PE, or 
Inner layer - extruded foamed XLPE, Outer layer - extruded XLPE. Composite thickness 3 mils minimum, 100 mils maximum. (Two layers are non-separable.)
		
			ShieldOptional.
		
			Inner CoveringOptional, extruded PVC, extruded Nylon (polyamide), extruded TPE, extruded FEP, extruded PVDF, extruded ETFE, or lacquered braids, 2 mils min. at any point.
		
			Outer ConductorOptional.
		
			Outer CoveringOptional over braided metal shield, otherwise, extruded PVC, extruded Nylon (polyamide), extruded FEP, extruded PVDF, extruded ETFE, or lacquered braids, 2 mils min. at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electronic Equipment, Class 2 Circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1874	Issued:1982-08-05
			Revised:2012-03-23


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Inner layer - extruded fomaed PE, Outer layer - extruded PE, or Inner layer - extruded foamed XLPE, Outer layer - extruded XLPE. Composite thickness 3 mils minimum, 100 mils maximum. (Two layers are non-separable.)

Shield	Optional.

Inner Covering	Optional, extruded PVC, extruded Nylon (polyamide), extruded TPE, extruded FEP, extruded PVDF, extruded ETFE, or lacquered braids, 2 mils min. at any point.

Outer Conductor	Optional.

Outer Covering	Optional over braided metal shield, otherwise, extruded PVC, extruded Nylon (polyamide), extruded FEP, extruded PVDF, extruded ETFE, or lacquered braids, 2 mils min. at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electronic Equipment, Class 2 Circuits only.