UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1906
                        
                            Issued:1983-08-29
                    
                            Revised:2012-05-02
                    
                            Style
                            1906
                        
                            Heating Wire.
                    
			Rating75 deg C, 125 Vac, Horizontal flame.
		
			Conductor(1-7 strands of hard drawn copper or copper alloy Resistance Wire) resistance wire, each 40 thru 30 AWG, wound 15-35 turns per inch on a rayon, cotton, figerglass or tetron yarn core.  Wires may be flattened.
		
			Covering (Plastic Thermo-senser)Extruded PVC or Polyamid, 2 mils minimum thickness at any point.
		
			Outer conductor (Senser Wire)40-30 AWG flattened hard drawn copper or nickel wire wound 10-55 turns per inch around above conductor assembly with covering.
		
			Contamination BarrierOptional - A longitudinally applied wrap of 0.5 mil or Barrier heavier Polyester tape.
		
			InsulationPVC, 20 mils min average, 18 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn Electrically Heated Blankets or Heating Pads where exposed to temperatures not exceeding 75 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1906	Issued:1983-08-29
			Revised:2012-05-02


Rating	75 deg C, 125 Vac, Horizontal flame.

Conductor	(1-7 strands of hard drawn copper or copper alloy Resistance Wire) resistance wire, each 40 thru 30 AWG, wound 15-35 turns per inch on a rayon, cotton, figerglass or tetron yarn core. Wires may be flattened.

Covering (Plastic Thermo-senser)	Extruded PVC or Polyamid, 2 mils minimum thickness at any point.

Outer conductor (Senser Wire)	40-30 AWG flattened hard drawn copper or nickel wire wound 10-55 turns per inch around above conductor assembly with covering.

Contamination Barrier	Optional - A longitudinally applied wrap of 0.5 mil or Barrier heavier Polyester tape.

Insulation	PVC, 20 mils min average, 18 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In Electrically Heated Blankets or Heating Pads where exposed to temperatures not exceeding 75 deg C.