UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1913
                        
                            Issued:1984-01-16
                    
                            Revised:2012-06-26
                    
                            Style
                            1913
                        
                            Jacketed cable.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG min., material not specified.
		
			InsulationInner layer: Extruded TFE 7 mil min. avg., 5 mil min. at any point. or Cellular TFE tape wrap, one or more layers, overall insulation thickness 7 mil min. avg., 5 mil min at any point. Outer layer: Polyester tape, 0.2 mil min. at any point applied with 50 percent overlap and heat sealed.
		
			ShieldOptional.
		
			JacketSpirally wrapped, two layers polyester tape, each layer applied with 50 percent overlap and heat sealed. Each layer min. 0.5 mil at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs insulated singles for use in jacketed cable.For use in Class 2 circuits of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1913	Issued:1984-01-16
			Revised:2012-06-26


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG min., material not specified.

Insulation	Inner layer: Extruded TFE 7 mil min. avg., 5 mil min. at any point. or Cellular TFE tape wrap, one or more layers, overall insulation thickness 7 mil min. avg., 5 mil min at any point. Outer layer: Polyester tape, 0.2 mil min. at any point applied with 50 percent overlap and heat sealed.

Shield	Optional.

Jacket	Spirally wrapped, two layers polyester tape, each layer applied with 50 percent overlap and heat sealed. Each layer min. 0.5 mil at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As insulated singles for use in jacketed cable.For use in Class 2 circuits of electronic equipment.