UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1928
                        
                            Issued:1984-07-26
                    
                            Revised:2011-08-11
                    
                            Style
                            1928
                        
                            Single Conductor with Extruded Insulation and Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG - 18 AWG material not specified.
		
			InsulationInner Layer - Extruded foamed PE or extruded foamed XLPE. Outer Layer - Extruded PE or extruded XLPE. Composite thickness 3 mils minimum thickness, 100 mils maximum thickness. (Two layers are non-separable.)
		
			Inner ShieldOptional
		
			CoveringOptional - PET or polyester tape wrap, minimum 0.7 mil thickness, applied with minimum 50 percent overlap.
		
			Outer ShieldOptional
		
			JacketExtruded PVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits of electronic equipment, or External interconnection in Class 2 circuits of electronic equipment where not routed along walls, floors, or other abuse areas.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1928	Issued:1984-07-26
			Revised:2011-08-11


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG - 18 AWG material not specified.

Insulation	Inner Layer - Extruded foamed PE or extruded foamed XLPE. Outer Layer - Extruded PE or extruded XLPE. Composite thickness 3 mils minimum thickness, 100 mils maximum thickness. (Two layers are non-separable.)

Inner Shield	Optional

Covering	Optional - PET or polyester tape wrap, minimum 0.7 mil thickness, applied with minimum 50 percent overlap.

Outer Shield	Optional

Jacket	Extruded PVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits of electronic equipment, or External interconnection in Class 2 circuits of electronic equipment where not routed along walls, floors, or other abuse areas.