UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1942
                        
                            Issued:1984-11-15
                    
                            Revised:2012-03-02
                    
                            Style
                            1942
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60, 80 deg C, 30 Vac, VW-1 flame.
		
			Conductor40 AWG min, material not specified.
		
			Insulation5 mils min at any point, 125 mils max, solid or cellular PE, FRPE, Polypropylene PFA, FEP or PTFE with or without irradiation.
		
			AssemblyThe insulation may be applied directly over the conductor or applied as a spiral wrapped. Polyethylene thread (5 mils min, 40 mils max) and enclosed with "tubed on" insulation. Insulated conductor is built with optional inner covering, optional inner shield, optional outer covering, shield and outer jacket.
		
			ShieldInner shield (optional). Outer shield (required).
		
			CoveringInner covering - (Optional) Extruded PVC, 2 mils min or 0.5 milsor heavier Polyester film or paper made of polyester fiber. Outer covering - (Optional) Extruded PVC or heat sealed PVC tape, Polyamide Polyester, PVDF, FEP or PTFE ETFE, or Lacquered braids, 2 mils min at any point or 0.5 mils or heavier Polyester film or paper made of polyester fiber or Polyester-Polyethylene laminated film.
		
			JacketPVC, 30 mils min average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Internal or External interconnections of Electronic Equipment and/or Appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1942	Issued:1984-11-15
			Revised:2012-03-02


Rating	60, 80 deg C, 30 Vac, VW-1 flame.

Conductor	40 AWG min, material not specified.

Insulation	5 mils min at any point, 125 mils max, solid or cellular PE, FRPE, Polypropylene PFA, FEP or PTFE with or without irradiation.

Assembly	The insulation may be applied directly over the conductor or applied as a spiral wrapped. Polyethylene thread (5 mils min, 40 mils max) and enclosed with "tubed on" insulation. Insulated conductor is built with optional inner covering, optional inner shield, optional outer covering, shield and outer jacket.

Shield	Inner shield (optional). Outer shield (required).

Covering	Inner covering - (Optional) Extruded PVC, 2 mils min or 0.5 milsor heavier Polyester film or paper made of polyester fiber. Outer covering - (Optional) Extruded PVC or heat sealed PVC tape, Polyamide Polyester, PVDF, FEP or PTFE ETFE, or Lacquered braids, 2 mils min at any point or 0.5 mils or heavier Polyester film or paper made of polyester fiber or Polyester-Polyethylene laminated film.

Jacket	PVC, 30 mils min average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Internal or External interconnections of Electronic Equipment and/or Appliances.