UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1944
                        
                            Issued:1984-11-27
                    
                            Revised:2012-07-02
                    
                            Style
                            1944
                        
                            Single Conductor with Extruded Insualtion.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor50 AWG min. Material not specified.
		
			InsulationExtruded FRPE, Foamed FRPE, Extruded XLFRPE, Foamed XLFRPE, Extruded PE, Foamed PE, Extruded XLPE, Foamed XLPE, Extruded SRPVC, or Foamed SRPVC, 2 mils minimum thickness at any point, 100 mils maximum thicknes.
		
			AssemblyInsulated conductor is built with optional inner covering, optional shield, optional jacket, optional shield and optional outer covering.
		
			ShieldOptional.
		
			CoveringInner covering - (Optional) Extruded PVC, Nylon, ETFE, or Polyester 2 mils minimum thickness at any point, or lacquered braid. Outer covering - (Optional) same as inner covering.
		
			Jacket(Optional) Same as Covering.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring Class 2.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1944	Issued:1984-11-27
			Revised:2012-07-02


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	50 AWG min. Material not specified.

Insulation	Extruded FRPE, Foamed FRPE, Extruded XLFRPE, Foamed XLFRPE, Extruded PE, Foamed PE, Extruded XLPE, Foamed XLPE, Extruded SRPVC, or Foamed SRPVC, 2 mils minimum thickness at any point, 100 mils maximum thicknes.

Assembly	Insulated conductor is built with optional inner covering, optional shield, optional jacket, optional shield and optional outer covering.

Shield	Optional.

Covering	Inner covering - (Optional) Extruded PVC, Nylon, ETFE, or Polyester 2 mils minimum thickness at any point, or lacquered braid. Outer covering - (Optional) same as inner covering.

Jacket	(Optional) Same as Covering.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring Class 2.