UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20008
                        
                            Issued:1979-06-12
                    
                            Revised:2012-03-16
                    
                            Style
                            20008
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating105 deg C, 125 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving; braid, nylon; polyethylene terephthalate (PET) or a thermoplastic jacket (4 mils minimum thickness at any point) or tape wrap. Such a barrier layer would serve to protect the cable during further processing and may be applied over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			CoveringOptional - Extruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point and may be extruded over the conductor assembly.
		
			JacketExtruded XLPE
		
			Diameter of core assembly under jacket (inches) ¿Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 inches or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20008	Issued:1979-06-12
			Revised:2012-03-16


Rating	105 deg C, 125 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving; braid, nylon; polyethylene terephthalate (PET) or a thermoplastic jacket (4 mils minimum thickness at any point) or tape wrap. Such a barrier layer would serve to protect the cable during further processing and may be applied over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Covering	Optional - Extruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point and may be extruded over the conductor assembly.

Jacket	Extruded XLPE
	Diameter of core assembly under jacket (inches) ¿	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 inches or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Interconnection or internal wiring of electronic equipment.