UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20011
                        
                            Issued:1979-06-12
                    
                            Revised:2019-11-07
                    
                            Style
                            20011
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating125 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedurre.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving; braid, paper, nylon; oriented polyethylene terephthalate or a thermoplastic jacket (4 mil minimum at any point) or tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied over the twisted ssembly of individual conductors or groups of conductors.
		
			CoveringOptional - 15 mils minimum average thickness, 13 mils minimum at any point PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded XLPE
		
			Dia. of cable under jacket
		
			0.425 inch or less30 mils min average24 mils minimum at any point
		
			0.426-0.700 inch dia45 avg36 min
		
			0.701-1.000 inch dia60 avg48 min
		
			1.001-1.500 inch dia80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 20011	Issued:1979-06-12
			Revised:2019-11-07


Rating	125 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM procedurre.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving; braid, paper, nylon; oriented polyethylene terephthalate or a thermoplastic jacket (4 mil minimum at any point) or tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied over the twisted ssembly of individual conductors or groups of conductors.

Covering	Optional - 15 mils minimum average thickness, 13 mils minimum at any point PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded XLPE
	Dia. of cable under jacket
	0.425 inch or less	30 mils min average	24 mils minimum at any point
	0.426-0.700 inch dia	45 avg	36 min
	0.701-1.000 inch dia	60 avg	48 min
	1.001-1.500 inch dia	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external wiring.