UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20026
                        
                            Issued:1979-11-02
                    
                            Revised:2012-03-29
                    
                            Style
                            20026
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Horizontal flame, Cable flame test.
		
			Conductor40 AWG minimum, material not specified.
		
			InsulationSolid or cellular PE, FRPE or XLPE, 5 mils min at any point, 100 mils maximum.
		
			AssemblyTwo, three or four conductors
		
			CoveringOptional, Extruded PVC, polyamide, polyester, PVDF, ETFE, polyethylene or lacquered braid, 2 mils minimum at any point or spirally wrapped polyethylene tape, 1 mil minimum at any point.
		
			ShieldOptional.
		
			Inner JacketExtruded PVC, 3 mils minimum thickness at any point, 100 mils maximum thickness. 30 mils minimum thickness for external use;
		
			Outer JacketOptional, extruded PVC 30 mils minimum thickness, 100 mils maximum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or External wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20026	Issued:1979-11-02
			Revised:2012-03-29


Rating	60 deg C, 30 Vac, Horizontal flame, Cable flame test.

Conductor	40 AWG minimum, material not specified.

Insulation	Solid or cellular PE, FRPE or XLPE, 5 mils min at any point, 100 mils maximum.

Assembly	Two, three or four conductors

Covering	Optional, Extruded PVC, polyamide, polyester, PVDF, ETFE, polyethylene or lacquered braid, 2 mils minimum at any point or spirally wrapped polyethylene tape, 1 mil minimum at any point.

Shield	Optional.

Inner Jacket	Extruded PVC, 3 mils minimum thickness at any point, 100 mils maximum thickness. 30 mils minimum thickness for external use;

Outer Jacket	Optional, extruded PVC 30 mils minimum thickness, 100 mils maximum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or External wiring of Class 2 circuits in electronic equipment.