UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            20034
                        
                            Issued:1979-12-05
                    
                            Revised:2012-04-30
                    
                            Style
                            20034
                        
                            Multiple conductor with extruded insulation
                    
			Rating60, 75, 90, 105 deg C, 300 Vac, Horizontal flame.
		
			Conductor18 AWG or smaller stranded, tinned or bare copper.
		
			InsulationPVC, 15 mils minimum average thickness, 13 mils thickness minimum at any point. Min acceptable distance between conductors is 45 mils.
		
			AssemblyTwo, three or four conductors, same as type SPT-2.
		
			JacketPVC, 30 mils minimum average thickness, 24 mils thickness minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further processing into cord sets and Power Supply Cords.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 20034	Issued:1979-12-05
			Revised:2012-04-30


Rating	60, 75, 90, 105 deg C, 300 Vac, Horizontal flame.

Conductor	18 AWG or smaller stranded, tinned or bare copper.

Insulation	PVC, 15 mils minimum average thickness, 13 mils thickness minimum at any point. Min acceptable distance between conductors is 45 mils.

Assembly	Two, three or four conductors, same as type SPT-2.

Jacket	PVC, 30 mils minimum average thickness, 24 mils thickness minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further processing into cord sets and Power Supply Cords.